How do I bank check and change lawn mower oil?

Quick Links:

  • When to Change the Oil
  • How to Cheque the Oil Level
  • Oil Alter Steps

When you put fresh oil into the crankcase, it will be a gilt or amber color. Over time, heat, clay and agitated air get into the crankcase causing the oil to darken. Dark oil is not simply dirty; it has also lost much of its power to glaze and protect engine components.

When to Alter the Oil

  • Every fifty hours of operation or afterward every mowing season
  • For a new lawn mower engine, y'all'll also need to alter the oil after the starting time v hours of functioning.
  • Also check the oil every time you utilise information technology. Tough weather such equally wet grass, heavy dust, high temperatures and rough or hilly terrain, may increase the frequency of required oil changes.
  • The new EXi engines serial™ from Briggs & Stratton® makes lawn mower oil maintenance easier than ever with Just Check & Add together™ Engines.

How to Cheque Oil Level

Checking the oil while the engine is cold and most of the oil is in the crankcase yields the most accurate reading.

For oil checking procedures on lawn mower applications, please watch our "Checking Engine Oil - Lawn mower Engine" video

Follow These Steps to Change your Oil

First, get-go by checking the oil level on your dipstick. The oil level of the dipstick should be betwixt the two holes on the dipstick. Overfilling your engine tin can be just as bad equally using old oil so make sure to bank check your dipstick level regularly.

Next, identify how to bleed the oil on your lawn mower. This can exist washed through the dipstick tube, drain plug or with an oil extractor tool. From in that location, it'south time to drain the oil:

  • Run the lawn mower engine for 15 minutes to warm up the oil (imperative to remove all dirty debris from engine)

  • Turn off the engine and disconnect the spark plug wire

  • Drain the gas from the mower OR place a plastic sandwich bag over the gas tank and spiral the cap on to prevent leaks

  • Insert the oil extractor tube and begin to pump the oil out of the engine

Once yous have removed all the onetime oil and placed information technology in a container, ready the container aside and after you lot are completed with the oil alter, accept this container to your nearest dealership where they tin can recycle your erstwhile oil.

Now, you can begin pouring in the clean, new oil. Check your operator'southward transmission to make up one's mind which oil is best for your engine. In this video we used Briggs & Stratton SAE 30 Oil which can be used for virtually minor engines. Once y'all finish pouring in the new oil, insert the dipstick in the tube and check to make sure the oil is at the correct level. When the oil is at the right level, spiral on the dipstick cap, put in new fuel if you removed it, so reconnect the spark plug wire.

Alert: Ever read the engine and equipment transmission(south) before starting, operating, or servicing your engine or equipment to avoid personal injury or belongings impairment. See an authorized dealer if you are unsure of any procedure or have boosted questions. Detect all Engine Condom Warnings

Shop Related Maintenance Parts